6 Inch Twin Wall Structural Locking Band Black

Opiniones sobre 6 Inch Twin Wall Structural Locking Band Black

La valoración en estrellas de un producto se calcula como la media de todas sus opiniones.


Logotipo de Gr8 Fires

Lo vende Gr8 Fires

www.gr8fires.co.uk

•

3,8 mil Opiniones

4,6

La información de esta página se basa únicamente en reseñas sobre productos escritas por clientes de Gr8 Fires a través de Trustpilot.


Información del producto

6" Inch Structural Locking Band Black See attached for the BFMCA guidance document which references Document J of the building regs. On page 9 under heading ‘Chimney Heights and Termination’, the text states ‘The maximum freestanding stack height above the roof for a traditional masonry chimney is 5.4 times the narrowest horizontal part of the chimney. In the case of stainless-steel system chimneys, the manufacturer’s installation instructions should be consulted; however in most cases it will be around 1.5 metres. This measurement is taken from the last point where the chimney stack passes the through or past the edge of the roof up to the chimney capping or termination. Tall chimneys may need bracing, always consult the manufacturer for advice’. We recommend a locking band should be fitted to any joint above the height of 1.5m to add sufficient structural support.
  • Marca: VTEC Flue Systems

Todas las opiniones


Valorada con 1 estrellas sobre 5

Not sure why I have been asked for a review of an item i ordered, paid for and was told I have a delivery date…..then after it didn’t turn up, was told they in fact didn’t have any stock and would for months.