Opiniones sobre Jotun Pilot ACR

Jotun Pilot ACR is a one component physically drying acrylic coating that has a semi gloss finish with good gloss retention. It is a high build product that is fast drying and can be used direct to metal. To be used as topcoat in atmospheric environments and can be applied at sub zero surface temperatures. Jotun Pilot ACR is recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. Approvals and certificates Low flame spread certificate acording to IMO/Solas directive. Grain, Newcastle Ocupational Health Low flame spread certificate acording to IMO FTPC part 2 MSC61 (67) Additional certificates and approvals may be available on request. Features & Benefits Reduces application cost Improves productivity Increases time to first maintenance Reduces your application cost Pilot ACR requires no mixing and has no pot life restrictions, which reduce time spent on preparation, waste, spillage and leftovers Quick drying time enables you to use, move or store your painted object shortly after paintingImproves your productivity Both quick drying and the possibility to save one coat, mean more output than what is obtainable with conventional, thin film acrylics or alkyds Tested to perform well and cure fast even at minus 15˚C. In cold climates this means there is no limitation to the painting season, and you can reduce heating costs.Reduces your maintenance cost Time to first maintenance is increased as Pilot ACR offers very good gloss retention and can be used as a C3 system when overcoated by itself (acc. ISO 12944) Direct-to-metal (DTM) Can be used as a one-coat DTM product in atmospheric corrosivity category C2. Can also be used as a two-coat DTM product in atmospheric corrosivity category C3 (acc. ISO 12944). Primers Pilot ACR will form a long lasting corrosion protection system together with primers like Penguard, Jotamastic or one-component acrylic primers for a wide range of purposes.